Atmospheric Robot – Xwetool https://www.xwetool.com Thu, 23 Oct 2025 03:26:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 https://www.xwetool.com/wp-content/uploads/2024/10/cropped-site-identity-32x32.jpg Atmospheric Robot – Xwetool https://www.xwetool.com 32 32 TAZMO Semiconductor Wafer Handling Robots MTE Series https://www.xwetool.com/product/semiconductor-wafer-handling-robots/ Fri, 26 Sep 2025 02:19:22 +0000 https://www.xwetool.com/?post_type=product&p=3274 TAZMO Semiconductor Wafer Handling Robots MTE Series

Data Sheet

Model Series MTE Series
Motor type Servo motor
Robot arm type Single arm
For wafer size 100mm – 450mm
Operating axis R/T/W/Z/P
Range of motion R=590mm(maximum arm reach,excluding end-effector)

T=350deg(±175deg from Home Pos.)

W=360deg(±180deg from Home Pos.)

Z=300mm

P=180deg

(Remark: All values are based on MTQ-EC *-EV.)
Repeatability XY: ±0.1 mm

Z: ±0.05 mm

P: ±0.02 deg
Wafer handling method Vacuum chuck

Gripper

Recess(pocket)

Bernoulli
Wafer hold check Vacuum chuck: Vacuum sensor with digital display

Gripper:Photomicro sensor

Bernoulli:Reflective sensor
Network protocol RS232C
   
Utility Power/Power source Single-phase AC100V~115V ±10%, 7A, 1 line(for 100V ACspec)

Single-phaseAC 200V~230V+10%,5A，1line(for 200V AC spec)

 

Customizations:

 

Robot arm length & Link(L) B 190mm 2 link
D 245mm 3 link
C 220mm 2 link
E 300mm 3 link
G 300mm 2 link
Elevator Stroke(Z) A 200mm
C 300mm
D 350mm
Voltage 1 100V
2 200V
Hand E Changer[Double]
T Reverse
H Horizontal changer
S Single
End Effector G Gripper
R Recess hand
B Bernoulli
Z Custom
N None
V Vacuum chuck
]]> 300mm Wafer Handling Robot For Atmospheric TT301A-WA Series https://www.xwetool.com/product/300mm-wafer-handling-robot-tt301a-wa/ Mon, 16 Jun 2025 09:26:26 +0000 https://www.xwetool.com/?post_type=product&p=2509 300mm Wafer Handling Robot For Atmospheric TT301A-WA Series

 

Data Sheet

Model Series TT301A-WA
Motor type Servo motor
Robot arm type Double arm for cylindrical coordinate robot 178mm
For wafer size 100mm – 300mm
Operating axis R1/R2/T/Z
Range of motion R: Arm length 178mm

T: +185deg

Z: 330mm
Repeatability R: ±0.1 mm

T: ±0.02deg

Z: ±0.05 mm
Wafer handling method Vacuum chuck

Gripper

Recess(pocket)

Bernoulli

Mix(double hand)
Wafer hold check Vacuum chuck: Vacuum sensor with digital display

Gripper:Photomicro sensor

Bernoulli:Reflective sensor
Network protocol RS232C ETHERNET
Utility Power/Power source Single-phase AC200V~230V+10%  8A  1 line
]]> TAZMO Wafer Transfer Robot For EFEM, Atmospheric TT301A-RA https://www.xwetool.com/product/wafer-transfer-robot-tt301a-ra/ Mon, 16 Jun 2025 09:26:25 +0000 https://www.xwetool.com/?post_type=product&p=2508 TAZMO Wafer Transfer Robot For EFEM, Atmospheric TT301A-RA

Model Series TT301A-RA
Motor type Servo motor
Robot arm type Single arm,  for rectangular coordinate robot 220mm
For wafer size 100mm – 300mm
Operating axis R/W/T/Z
Range of motion R: Arm length 220mm

T: +185deg

Z: 330mm
Repeatability XY: ±0.1 mm

Z: ±0.05 mm
Wafer handling method Vacuum chuck

Gripper

Recess(pocket)

Bernoulli
Wafer hold check Vacuum chuck: Vacuum sensor with digital display

Gripper:Photomicro sensor

Bernoulli:Reflective sensor
Network protocol RS232C ETHERNET
Utility Power/Power source Single-phase AC200V~230V+10%  8A  1 line

 

Customization:

 

Wafer Handling Method 1) V: Vacuum chuck
2) G: Gripper
3) R: Recess (pocket)
4) B: Bernoulli
5) M: Mix (For double-hand)
Hand Type 1) N: None
2) V: Double reverse (without harmonic gear) standard
3) U: Reverse (with harmonic gear) high load
4) W: Double reverse (with harmonic gear) high load
Mapping Sensor 1) N: No mapping sensor
2) T: Through-beam sensor
3) R: Reflection-type sensor
Slide Rail 1) N: None
2) S: Standard (80w motor)
3) H: High speed (200w motor)
Slide Rails Stroke N: None
A: 505mm
B: 1010mm
C: 1515mm
D: 2020mm
E: 2525mm
F: 600mm
G: 1200mm
H: 1800mm
J: 00mm
K: 800mm
Position of Motor Installation N: No slide rail
R: Install on the right (Standard)
L: Install on the left
]]> TAZMO Robot PLP Double Arm, Customizable https://www.xwetool.com/product/tazmo-robot-plp-double-arm/ Mon, 16 Jun 2025 09:26:24 +0000 https://www.xwetool.com/?post_type=product&p=2506 TAZMO Robot PLP Double Arm, Customizable

Data Sheet

Model Series PLP Series
Motor type Servo motor
Robot arm type Double arm
Target work/Handling object Square substrate 300-650mmm
Operating axis R1/R2/T/Z
Range of motion RI-axis, R2-axis: Maximum arm reach 760mm(from swivel center)

T:±185deg

Z:500mm

S:880mm
Repeatability R2,R2 ±0.1 mm

T: ±0.03 deg

Z: ±0.1 mm

S: ±0.25 mm
Wafer handling method Vacuum chuck

Gripper

Recess(pocket)
Wafer hold check Vacuum chuck: Vacuum sensor with digital display

Gripper:Photomicro sensor
Network protocol RS232C ETHERNET
Utility Power/Power source Single-phase or Three-phase AC200V~230V +10% 5A~30A

Customization:

Type Description
Arm type T: Cylindrical Coordinate Standard Single
W: Cylindrical Coordinate Standard Double
R: Square Coordinate Standard Single
Elevator type S: Standard
W: Telescopic 2-step Elevation
Hand type N: None
H: Horizontal changer
T: Reverse
Arm 1: 385mm(R·W)
2: 179mm(R·W)
4: 220mm(R·T)
6: 300mm(T)
8: 370mm
Elevator 1: 500mm(S·W)
2: 700mm(W)
4: 300mm(S)
Slide rail 0: None
1: 505mm
2: 1010mm
3: 1515mm
4: 2020mm
6: 600mm
8: 1800mm
9: 880mm
I: 2000mm
J: 2060mm
Work gripping method (hand 1) N: None
G: Gripper
V: Vacuum chuck
R: Recess (without seating sensor)
P: Recess (with seating sensor)
Work gripping method (hand 2) N: None
V: Vacuum chuck
G: Gripper
R: Recess (without seating sensor)
P: Recess (with seating sensor)
Mapping sensor T: Transparent type
N: None
R: Reflective type
]]> Industrial Robotic Arm For PLP https://www.xwetool.com/product/industrial-robotic-arm-plp/ Mon, 16 Jun 2025 09:26:24 +0000 https://www.xwetool.com/?post_type=product&p=2507 Wafer Robot Arm NTWR, With Stepping Motor, Atmospheric, Double Arm, https://www.xwetool.com/product/wafer-robot-arm-ntwr/ Mon, 16 Jun 2025 09:26:23 +0000 https://www.xwetool.com/?post_type=product&p=2505 TAZMO Wafer Robot NTSR Series, Atmospheric Single Arm https://www.xwetool.com/product/tazmo-wafer-robot-ntsr/ Mon, 16 Jun 2025 09:26:22 +0000 https://www.xwetool.com/?post_type=product&p=2504 Double Arm Wafer Handling Robot NEW Series, High Speed Transfer https://www.xwetool.com/product/wafer-handling-robot-new/ Mon, 16 Jun 2025 09:26:21 +0000 https://www.xwetool.com/?post_type=product&p=2503 wafer robot arm TAZMO Atmospheric Robot NES Series, High Speed Transfer https://www.xwetool.com/product/wafer-robot-arm-nes/ Mon, 16 Jun 2025 09:26:20 +0000 https://www.xwetool.com/?post_type=product&p=2502